Once license is bought, you can get an Activation Key by entering the System Key You can buy Activation License from the official webġ9. Please configure your network interface to “Obtain an IP address automatically”.ġ8. Now you have successfully loaded DD-WRT firmware into THE DEVICE. Reboot the device (you may need to power cycle)ġ7.
#Engenius locator software download update
Update RedBoot non-volatile configuration - continue (y/n)? yġ6. Note: This step will take about 10~15 minutes to complete, please wait patiently. Download the image from TFTP server and copy into memory RedBoot> ip_address -l 192.168.1.1 -h 192.168.1.11Ībout to initialize FLASH image system - continue (y/n)? y Configure the bootloader IP and TFTP server IP address: Switch to PuTTy terminal window and type in commands as follows.ġ1. Copy linux.bin (DD-WRT firmware) to TFTP server directory C:\tftp.ġ0. Run Tftpd32 and configure Current Directory to C:\tftp and Server interface to 192.168.1.11.ĩ. If not, you will have to repeat step 5 and 6 again until RedBoot prompt appears.Ĩ. Once your see RedBoot> prompt that means you have Note: Everything should be done in 2 seconds. When you see the terminal window pops up, press and press. Plug in the adaptor head into your PoE DC-IN and monitor your network status closely to the transition from to. Now, keep your mouse pointer right overĦ. That is, we need to login into the device bootloader in this short period of time.ĥ. Whenever the device is powered on, there are 2 seconds timeout before initiating boot. Please follow the instructions closely and catch the right timing for the action.Ĥ. You may need to try several times to actually login into the bootloader. The following procedure is time sensitive. Configure your local computer IP address to 192.168.1.11(with network interface down).ģ. But keep the network cables connected to THE DEVICE and your PC/Notebook.Ģ. Telnet application (PuTTy is recommended)ġ. Basic knowledge on embedded system and network concept. Posted: Mon 3:16 Post subject: Flashing Guide for all Senao/Engenius ATHEROS products
0 kommentar(er)
